Publications

  • International Conferences​

  1. Sang-Hyeon Lee, Dong-Jin Park, and Ki-Chan Kim , “PERFORMANCE ANALYSIS ACCORDING TO FERRITE SHELL OF ROTOR SURFACE OF INTERIOR PERMANENT MAGNET SYNCHRONOUS MOTOR,” International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF 2015), Sept., 2015.

  2. Sang-Hyeon Lee, Yong-Bok Lee, and Ki-Chan Kim , “AN ANALYSIS ON THE CURRENT INFORMATION OF WOUND FIELD SYNCHRONOUS MOTOR FOR HIGH EFFICIENCY,” International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF 2015), Sept., 2015.

  3. Yong-Bok Lee, Ki-Chan Kim , “A STUDY ON THE CORE LOSS OF PWM INVERTER DRIVEN IPMSM CONSIDERING HARMNONICS ON CURRENTS,” International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF 2015), Sept., 2015.

  4. Yong-Bok Lee, Young-Chul Shin, and Ki-Chan Kim , “Electromagnetic Characteristic due to Auxiliary Rotor Slots of Induction Motor,” 24th International Conference on Magnet Technology (MT24), October, 2015.

  5. Yong-Bok Lee, Ki-Chan Kim , “A Study on The Core Loss of PWM Inverter Driven IPMSM considering Harmonics on Currents,” 24th International Conference on Magnet Technology (MT24), October, 2015.

  6. Ki-Chan Kim “Optimal Design of Rotor Slot Shape of Induction Motor for Electric Vehicle,” IEEE International Magnetics Conference Intermag 2015, May. 2015.

  7. Ki-Chan Kim , “Analysis on Correlation between Cogging Torque and Torque Ripple Considering Magnetic Saturation,” 16th Conference on Electriomagnetic Field Computation (CEFC 2014), May, 2014.

  8. Min-Gyu Kim, Liang Fang, and Jung Yoon Lim, and Ki-Chan Kim , “A Novel Calculation Method on the Current Information of Vector Inverter for Interior Permanent Magnet Synchronous Motor for Electric Vehicle,” 16th Conference on Electriomagnetic Field Computation (CEFC 2014), May, 2014.

  9. Min-Gyu KIM, Seung-Ha Jeon, and Ki-Chan KIM , “The Study on Compensation design method for two operating points of BLDC motor according to changes of temperature,” 17th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2013), September, 2013.

  10. Ki-Chan Kim, Min-Gyu Kim, and Dong-Seok Ryu, “A Study on Optimal Design for Error Reduction of MagneticPosition Sensor,” 16th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2012), September, 2012.

  11. Ki-Chan Kim, Su-Jin Hwang, Ki-Young Sung, Yeong-Sik Kim “A Study on the Fault Diagnosis Analysis of Variable Reluctance Resolver for Electric Vehicle” International Conference on Electrical Machines (ICEM 2012) , Sept, 2012

  12.  Hong-Hyun Kim, Min-kyu Kim, and Ki-Chan Kim “Optimal Angle Error Reduction of Magnetic Position Sensor by 3D FEM” International Conference on Electrical Machines (ICEM 2012) , Sept, 2012

  13.  Min-Gyu Kim, Liang Fang, and Jung Yoon Lim, and Ki-Chan Kim “A Novel Calculation Method on the Current Information of Vector Inverter for Interior Permanent Magnet Synchronous Motor for Electric Vehicle” 15th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2012), Nov, 2012

  14. Ki-Chan Kim “Analysis on Correlation between Cogging Torque and Torque Ripple Considering Magnetic Saturation” 15th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2012), Nov, 2012

  15. Ki-Chan Kim, Dong-seok Ryu, and Min-Gyu Kim “Characteristic of Ferromagnetic Materials Due to Uneven Magnetic Saturation,” IEEE International Magnetics Conference Intermag 2011, pp 3669-3672, Apr. 2011.

  16. Ki-Chan Kim, “Torque Ripple Analysis of Permanent Magnet Assisted Synchronous Reluctance Motor by Using Load Curves,” 15th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2011), September, 2011.

  17. Min-Gyu Kim, Won-Kyu Kim, and Ki-Chan Kim, “A study on optimal Design for Error Reduction of Magnetic Position Sensor,” 15th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2011), September, 2011.

  18. Ki-Chan Kim, Su-Jin Hwang, Ki-Young Sung, and YeongSik Kim, “A Study on the Fault Diagnosis Analysis of Variable Reluctance Resolver for Electric Vehicle,” Sensors 2010 IEEE, pp. 290-295, November, 2010.

  19. S. Kim, J. Im, S. Go. J. Bae, W. Kim, K. Kim, and J. Lee, “Robust Torque Control of DC Link Voltage Fluctuation for SynRM considering Inductances with Magnetic Saturation,” 11th Joint MMM-Intermag Conference 2010, p. 735, January, 2010.

  20. W. Kim, K. Kim, S. Ham, J. Im, S. Im, and J. Lee, “A Study on the Rotor Designing Algorithm using Torque Separation Method and the Characteristics of the Optimal Materials for LSPM,” 11th Joint MMM-Intermag Conference 2010, p. 703, January, 2010.

  21. K. Kim, J.Im, S. Kim, W. Kim, S. Lim, and J. Lee, “A Study on shape of copper die-casting rotor bar of single phase induction motor for high starting torque and high efficiency,” 11th Joint MMM-Intermag Conference 2010, p. 659, January, 2010.

  22. Ki-Chan Kim and Ju Lee, “A Study on Performance Simulation of Interior Permanent Magnet Synchronous Motor for Electric Vehicle considering Nonlinearity,” The 17th Conference on the Computation of Electromagnetic Fields(Compumag 2009), November, 2009.

  23. Ki-Chan Kim and Ju Lee, “Torque Ripple Analysis Method for Permanent Magnet Synchronous Reluctance Motor,” The 17th Conference on the Computation of Electromagnetic Fields(Compumag 2009), November, 2009.

  24. C. Jin, K. Kim, and J. Lee, “Analysis of variable reluctance resolver according to output signal winding methods,” IEEE International Magnetics Conference 2009, p. 148, May, 2009.

  25. J. Bae, S. Kim, J. Im, K. Kim, C. Jin, and J. Lee, “Effects of magnetic saturation on spindle motor characteristics,” IEEE International Magnetics Conference 2009, p. 123, May, 2009.

  26. W. Kim, K. Kim, D. Kang, S. Go, and J. Lee, “Optimal magnet design of PMA-SynRM for wide constant-power operation,” IEEE International Magnetics Conference 2009, p. 73, May, 2009.

  27. Ki-Chan Kim and Ju Lee, “A Study on Design Parameters of a Synchronous Reluctance Motor Considering Magnetic Saturation Effect,” Asian Magnetics Conference (AMC2008), p. 228, December, 2008.

  28. Ki-Chan Kim and Ju Lee, “Magnetic Shield Design between Permanent Magnet Motor and Sensor for a Hybrid Electric Vehicle,” Asian Magnetics Conference (AMC2008), p. 220, December, 2008.

  29. Chang-Sung Jin, Ki-Chan Kim, Dae-Sung Jung, and Ju Lee, “Study on the Improvement Magnetic Torque Characteristics of Interior Permanent Magent Motor for Direct Drive Washing Machine,” Asian Magnetics Conference (AMC2008), p. 96, December, 2008.

  30. Ki-Chan Kim and Ju Lee, “Demagnetization Analysis of Permanent Magnets according to Rotor Types of Interior Permanent Magnet Synchronous Motor,” Asian Magnetics Conference (AMC2008), p. 93, December, 2008.

  31. Chang-Sung Jin, Ki-Chan Kim, Young-Kwan Kim, Sung-Chul Go, and Ju Lee, “Design of IPMSM to Reduce Cogging Torque Considering Tapping the rotor and Shape of Barrier,” the 13th biennial IEEE Conference on Electromagnetic Field Computation, p. 359, May, 2008.

  32. Won-Ho Kim, Ki-Chan Kim, and Ju Lee, “A Study on the Optimal Rotor Design of LSPM Considering Starting Torque and Efficiency,” the 13th biennial IEEE Conference on Electromagnetic Field Computation, p. 344, May, 2008.

  33. Ki-Chan Kim and Ju Lee, “Multi-Objective Optimal Design for Interior Permanent Magnet Synchronous Motor,” the 13th biennial IEEE Conference on Electromagnetic Field Computation, p. 256, May, 2008.

  34. K. Kim and J. Lee, “A Study on the Multi-Objective Optimal Design of Interior Permanent Magnet Synchronous Motor,” Intermag EUROPE 2008, p. 22, May, 2008.

  35. K. Kim and J. Lee, “A Study on the Rotor Design of Interior Permanent Magnet Synchronous Motor for the Wide Constant Power Region,” 52nd Annual Conference on Magnetism and Magnetic Materials, p. 382, November, 2007.

  36. K. Kim and J. Lee, “Optimal Design for Permanent Magnet Wind Trubine Generator coupling with Power Converter,” 52nd Annual Conference on Magnetism and Magnetic Materials, p. 128, November, 2007.

  37. S. Lim, K. Kim, S. Oh, and J. Lee, “Magnetizing Fixture Optimization for Cogging Torque Reduction of Brushless Permanent Magnet Motor,” 52nd Annual Conference on Magnetism and Magnetic Materials, p. 124, November, 2007.

  38. Jae Nam Bae, Ki Chan Kim, Ji Hyung Kim, Gap Jae Lee, Dae Hyun Gu, Seung Ryu, and Ju Lee, “Study about the effect of magnetizing distribution on spindle motor characteristics,” International Conference on Electrical Machines and Systems(ICEMS2007), pp. 832-895, October, 2007.

  39. Kim Ki Chan, Ryu Dae il, Ko Kwang Cheol, Koo Dae Hyun, Baek Soo Hyun, and Lee Ju, “The Parameter Study of Permanent Magnet Wind Generator for the Low Cogging Torque and Power Ripple,” The International Conference on Electrical Engineering (ICEE), p. 210, July, 2007.

  40. Seung-Bin Lim, Ki-Chan KIM, Go Sung Chul, Sang-Hwan Won, and Ju Lee, “Performance Computation of Claw-Pole Type Alternator based 3 Dimension Finite Element Method and Fourier Series,” The 16th Conference on the Computation of Electromagnetic Fields(Compumag 2007), pp. 725-726, June, 2007.

  41. Ki-Chan Kim and Ju Lee, “A Study on the Characteristics according to Duct Shape of IPMSM for Hybrid Electric Vehicle,” The 16th Conference on the Computation of Electromagnetic Fields(Compumag 2007), pp.665-666, June, 2007.

  42. Ki-Chan Kim, Joon Seon Ahn, Sung Hone Won, and Ju Lee, “Design of Synchronous Reluctance Motor with Optimal Barrier Structure in the Rotor,” The 16th Conference on the Computation of Electromagnetic Fields(Compumag 2007), pp. 663-664, June, 2007.

  43. K. Kim and J. Lee, “Analysis of axial magnetic force distribution due to the axial clearance for electrical rotating machine,” 10th Joint MMM/INTERMAG Conference, pp. 490-491, January, 2007.

  44. K. Kim, J. Ahn. S. Won, and J. Lee, “A study on the optimal design of synchronous reluctance motor for the maximum torque and power factor,” 10th Joint MMM/INTERMAG Conference, p. 490, January, 2007.

  45. K. Kim and J. Lee, “A study on the magnetic shield between permanent magnet motor and sensor for hybrid electric vehicle,” 10th Joint MMM/INTERMAG Conference, p. 420, January, 2007.

  46. K. Kim and J. Lee, “The study on the characteristics of pole arc and salient pole ratio to improve torque performance of IPMSM,” 10th Joint MMM/INTERMAG Conference, p. 418, January, 2007.

  47. J. Ahn, S. Won, K. Kim, and J. Lee, “The Position Tracking Characteristic Analysis of 3-DOF Spherical PM Motor,” 10th Joint MMM/INTERMAG Conference, p. 327, January, 2007.

  48. K. Kim and J. Lee, “The study on the lumped parameter design method for permanent magnet motor with the overhang coefficient by using REM and simulation DOE,” 10th Joint MMM/INTERMAG Conference, p. 326, January, 2007.

  49. Lee Sung Gu, Song-Hong Won, Hyoung-Woo Lee, Joon-Seon Ahn, Ki-Chan Kim, Seung-Kil Choi, and Ju Lee, “Combined method reducing calculation time of 3D transient finite element analysis,” The 2006 International Conference on Electrical Machines and Systems(ICEMS2006), DS4E2-04, November, 2006.

  50. Ki-Chan KIM, Yo-Han Hwang, Dae-Hyun Koo, Samuel Yeo, Chul Kyu Lee, and Ju Lee, “A Study on the Motor Performance due to Winding Design for Single Phase Induction Motor,” The 2006 International Conference on Electrical Machines and Systems(ICEMS2006), DS2E1-02, November, 2006.

  51. K. Kim, J. Ahn, S. Won, and J. Lee, “A New Torque Ripple Analysis Method for Permanent Magnet Assisted Synchronous Reluctance Motor by using Load Angle Characteristic,” IEEE International Magnetics Conference, p. 981, May, 2006.

  52. K. Kim, S. Lim, and J. Lee, “The Design of Permanent Magnet Synchronous Motor Considering Partial Demagnetization on the Permanent Magnet,” IEEE International Magnetics Conference, p. 309, May, 2006.

  53. Sung-Hong Won, Joon Seon Ahn, Ki Chan Kim, and Ju Lee, “Performance Prediction of Switched Reluctance Motor Considering Windage Loss for High Speed Application,” the 12th biennial IEEE Conference on Electromagnetic Field Computation, p. 414, April, 2006.

  54. Ki-Chan Kim and Ju Lee, “Overhang Effect Analysis of Permanent Magnet Machine According to the Rotor Types,” the 12th biennial IEEE Conference on Electromagnetic Field Computation, p. 411, April, 2006.

  55. Sol Kim, Seung-Bin Lim, Ki-Chan Kim, Joon Seon Ahn, and Ju Lee, “Analysis of Synchronous Reluctance Motor using Equivalent Magnet Considering Skew and Flux Density Harmonics Contents,” the 12th biennial IEEE Conference on Electromagnetic Field Computation, p. 110, April, 2006.

  56. Ki-Chan Kim and Ju Lee, “Comparison of Biot Savart Simulation and 3D Finite Element Simulation the Electromagnetic Force acting on End Windings of Electrical Machines,” the 12th biennial IEEE Conference on Electromagnetic Field Computation, p. 101, April, 2006.

  57. Ki-Chan Kim, Joon Seon Ahn, Sung Hong Won, and Ju Lee, “A Study on the Calculation and Reduction Method of Torque Ripple for Permanent Magnet Assisted Synchronous Reluctance Motor by using the Load Angle Curves,” the 12th biennial IEEE Conference on Electromagnetic Field Computation, p. 75, April, 2006.

  58. Ki-Chan Kim, Seung-Bin Lim, and Ju Lee, “The Effect on Partial Demagnetization of Permanent Magnet Synchronous Motor for Hybrid Electric Vehicle,” the 12th biennial IEEE Conference on Electromagnetic Field Computation, p. 67, April, 2006.

  59. Kab-Jae Lee, Ki-Chan Kim, and Ju Lee, “Analysis n the Effect of Pole Arc and Salient Pole Ratio to Improve Torque Characteristics of IPMSM,” 12th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2005), pp. 384-385, September, 2005.

  60. Ki-Chan Kim and Ju Lee, “Analysis of Axial Magnetic Force Distribution due to Axial Gap for Electrical Rotational Machine,” 12th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2005), pp. 382-383, September, 2005.

  61. Ki-Chan Kim and Ju Lee, “Analysis on the magnetic Field Saturation Effect due to Ventilation Hole in the Core,” 12th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2005), pp. 380-381, September, 2005.

  62. Ki-Chan Kim, Seung-Bin Lim, Ki-Bong Jang, Sung-Gu Lee, and Ju Lee, “Analysis on the Direct-Driven High Power Permanent Magnet Generator for Wind Turbine,” The eighth International Conference On Electrical Machines and Systems(ICEMS 2005), September, 2005.

  63. Kab-Jae Lee, Ki-Chan Kim, and Ju Lee, “Rotor Design to Optimize Torque Characteristics og Interior Permanent Magnet Motor with Fitting Mechanical Safety,” The 15th Conference on the Computation of Electromagnetic Fields Shenyang (Compumag 2005), I-225, June, 2005.

  64. Ki-Chan KIM, Kab-Jae Lee, and Ju Lee, “Analysis of Electromagnetic Force Distribution on the End Winding of motor by Using 3D FEM,” The 15th Conference on the Computation of Electromagnetic Fields Shenyang (Compumag 2005), I-225, June, 2005.

  65. Ki-Chan KIM, Kab-Jae Lee, and Ju Lee, “Characteristic Analysis of Spoke Type Permanent Magnet Generator Considering Overhang by Using 2D & 3D FEM,” The 15th Conference on the Computation of Electromagnetic Fields Shenyang (Compumag 2005), I-225, June, 2005.

  66. Kab-Jae Lee, Ki-Chan Kim, and Ju Lee, “Rotor optimization of interior permanent magnet synchronous motor considering mechanical stress,” Intermag ASIA 2005, p. 359, April, 2005.

  67. Ki-Chan KIM, Kab-Jae Lee, and Ju Lee, “Dynamic analysis of spoke type permanent magnet generator with large overhang,” Intermag ASIA 2005, p. 334. April, 2005.

  68. Kab-Jae Lee, Ki-Chan Kim, and Ju Lee, “Analysis on the effect of pole arc and salient pole ratio to improve torque characteristics of IPMSM,” Intermag ASIA 2005, p. 334, April, 2005.

  69. Ki-Chan KIM, Kab-Jae Lee, and Ju Lee, “Analysis of electromagnetic force distribution on end winding for motor reliance,” Intermag ASIA 2005, p. 889, April, 2005.

  전기 자동차 전기 부품 연구실  대전광역시 유성구 동서대로 125  N3동(전기전자관) 204호

전화 : 042-821-1608 Electric Vehicle Electrical Parts Laboratory

Copyright Energy Conversion Laboratory, All Right Reserved