top of page

Publications

Publications

  • International Journal

​

  1. Ki-Chan Kim and Dong-Jin Park, Novel Design of Interior Permanent-Magnet Synchronous Motor Adopting Ferrite Shells on the Rotor Surface," IEEE Transactions on Applied Superconductivity, to be published, 2016

  2. Ki-Chan Kim and Sung-In Park, "Torque Ripple Reduction Method With Asymmetric Pole for Wound-Field Synchronous Motor,"IEEE Transactions on Magnetics, to be published, 2015.

  3. Ki-Chan Kim “A Novel Method for Minimization of Cogging Torque and Torque Ripple for Interior Permanent Magnet Synchronous Motor,”IEEE Transactions on Magnetics, to be published, 2014.

  4. Ki-Chan Kim and Sung-In Park, “Study on the Optimal Design of a Novel Slotless Resolver by FEM,”IEEE Transactions on Magnetics, to be published, 2014.

  5. Ki-Chan Kim, “A Novel Calculation Method on the Current Information of Vector Inverter for Interior Permanent Magnet Synchronous Motor for Electric Vehicle,”IEEE Transactions on Magnetics, to be published, 2013.

  6. Ki-Chan Kim, “A Novel Method for Minimization of Cogging Torque and Torque Ripple for Interior Permanent Magnet Synchronous Motor,”IEEE Transactions on Magnetics, to be published, 2013.

  7. Ki-Chan Kim, "Analysis on the Characteristics of Variable Reluctance Resolver considering Uneven Magnetic Fields," IEEE Transactions on Magnetics, Vol. 49, No. 7, pp.3858-3861, May. 2013.

  8. Ki-Chan Kim, and Seung-Ha Jeon, "Analysis on Correlation between Cogging Torque and Torque Ripple by considering Magnetic Saturation," IEEE Transactions on Magnetics, Vol. 49, No. 5, pp.2417-2420, May. 2013.

  9. Ki-Chan Kim, and Dong-Seok Ryu, "Fault Diagnosis Analysis of Variable Reluctance Resolver for Electric Vehicle," Advanced Science Letters, to be published, 2013.

  10. Ki-Chan Kim, and Min-Kyu Kim, "Optimal Angle Error Reduction Method of Magnetic Position Sensor by 3D FEM," Advanced Science Letters, to be published, 2013.

  11. Ki-Chan Kim, "A Novel Magnetic Flux Weakening Method of Permanent Magnet Synchronous Motor for Electric Vehicles," IEEE Transactions on Magnetics, Vol. 48, No. 11, pp.4042-4045, Nov. 2012.

  12. Ki-Chan Kim, and Dong-Seok Ryu, "Torque Characteristic with respect to the Load Angle of a Permanent Magnet Motor," IEEE Transactions on Magnetics, Vol. 48, No. 11, pp.4200-4203, Nov. 2012.

  13. Ki-Chan Kim, "Magnetic Saturation Effect on the Rotor Core of Synchronous Reluctance Motor," Journal of Electrical Engineering and Technology, Vol. 6, No. 5, pp. 634-639, Sept. 2011.

  14. Ki-Chan Kim, Dong-Seok Ryu, and Min-Gyu Kim, “Characteristics of Ferromagnetic Materials due to Uneven Magnetic Saturation,” IEEE Transactions on Magnetics, Vol. 47, No. 10, pp.3669-3672, Oct. 2011.

  15. Ki-Chan Kim, “Comparison of Biot-Savart’s Law and 3D FEM in the Study of Electromagnetic Forces Acting on End Winding,” Journal of Electrical Engineering and Technology, Vol. 6, No. 3, pp. 369-374, May 2011.

  16. Ki-Chan Kim, “A Study on Performance Simulation of Interior Permanent Magnet Synchronous Motor for Electric Vehicle considering Nonlinear Parameters”, International Journal of Applied Electromagnetics and Mechanics, vol. 33, pp.343-350, 2010.

  17. ChangSung Jin, Dae Sung Jung, Ki-Chan Kim, Yeon Do Chun, Hyung Woo Lee, and Ju Lee, “A Study on Improvement Magnetic Torque Characteristics of IPMSM for Direct Drive Washing Machine”, IEEE Transactions on Magnetics, vol. 45, no. 6, pp.2811-2814, June, 2009.

  18. Ki-Chan Kim, Kwangsoo Kim, and Ju Lee, “Demagnetization Analysis of Permanent Magnets according to Rotor Types of Interior Permanent Magnet Synchronous Motor,” IEEE Transactions on Magnetics, vol. 45, no. 6, pp.2799-2802, June, 2009.

  19. Ki-Chan Kim, Chang Sung Jin, Hee Jun Kim, and Ju Lee, "Magnetic Shield Design between Interior Permanent Magnet Synchronous Motor and Sensor for Hybrid Electric Vehicle,” IEEE Transactions on Magnetics, vol. 45, no. 6, pp.2835-2838, June, 2009.

  20. WonHo Kim, Ki-Chan Kim, Seung Joo Kim, Dong-Woo Kang, Sung-Chul Go, Hyung Woo Lee, Yon-Do Chun, and Ju Lee, “A Study on the Optimal Rotor Design of LSPM Considering the Starting Torque and Efficiency,” IEEE Transactions on Magnetics, vol. 45, no. 3, pp.1808-1811, March, 2009.

  21. Ki-Chan Kim, Ju Lee, Hee Jun Kim, and Dae-Hyun Koo, "Multi-Objective Optimum Design for Interior Permanent Magnet Synchronous Motor,” IEEE Transactions on Magnetics, vol. 45, no. 3, pp.1780-1783, March, 2009.

  22. K.-C. Kim, Ju Lee, "Analysis on the Magnetic Field Saturation Effect due to Ventilation Hole," International Journal of Applied Electromagnetics and Mechanics ET Electric Power Applications, vol. 25, pp.577-581, 2007.

  23. J. Ahn, S.-B. Lim, K.-C. Kim, J. Lee, J.-H. Choi, S. Kim and J.-P. Hong, "Field Weakening Control of Synchronous Reluctance Motor for Electric Power Steering," IET Electric Power Applications, vol. 1, no. 4, pp.565-570, July, 2007.

  24. Seung-Bin Lim, Dae-Sung Jung, Ki-Chan KIM, Dae-Hyun Koo, and Ju Lee, "Characteristic Analysis of Permanent Magnet Type Stepping Motor with Claw Poles by using 3 Dimensional Finite Element Method," IEEE Transactions on Magnetics, vol. 43, no. 6, pp.2519-2521, June, 2007..

  25. Ki-Chan KIM, Joon Seon Ahn, Sung Hong Won, Jung-Pyo Hong and Ju Lee, "A Study on the Optimal Design of SynRM for the High Torque and Power Factor," IEEE Transactions on Magnetics, vol. 43, no. 6, pp.2543-2545, June, 2007.

  26. Ki-Chan KIM, Dae-Hyun Koo, and Ju Lee, "Analysis of Axial Magnetic Force Distribution Due to the Axial Clearance for Electrical Rotating Machine," IEEE Transactions on Magnetics, vol. 43, no. 6, pp.2546-2548, June, 2007.

  27. Ki-Chan KIM, Dae-Hyun Koo, Jung-Pyo Hong and Ju Lee, "A Study on the Characteristics Due to Pole-Arc to Pole-Pitch Ratio and Saliency to Improve Torque Performance of IPMSM," IEEE Transactions on Magnetics, vol. 43, no. 6, pp.2516-2518, June, 2007.

  28. Ki-Chan KIM, Dae-Hyun Koo, and Ju Lee, "The Study on the Overhang Coefficient for Permanent Magnet Machine by Experimental Design Method," IEEE Transactions on Magnetics, vol. 43, no. 6, pp.2483-2485, June, 2007.

  29. Dae-Sung Jung, Seung-Bin Lim, Ki-Chan KIM, JoonSeon Ahn, Sung-Chul Go, Yeoung-Gyu Son, and Ju Lee, "Optimization for Improving Static Torque Characteristic in Permanent Magnet Stepping Motor with Claw Poles," IEEE Transactions on Magnetics, vol. 43, no. 4, pp.1577-1580, April, 2007.

  30. Hyung-Woo Lee, Ki-Chan KIM, and Ju Lee, "Review of Maglev Train Technologies," IEEE Transactions on Magnetics, vol. 42, no. 7, pp.1917-1925, July, 2006.

  31. Ki-Chan KIM, Seung-Bin Lim, Dae-Hyun Koo, and Ju Lee, "The Shape Design of Permanent Magnet for Permanent Magnet Synchronous Motor Considering Partial Demagnetization," IEEE Transactions on Magnetics, vol. 42, no. 10, pp.3485-3487, October, 2006.

  32. JoonSeon Ahn, Ki-Chan Kim, and Ju Lee, "Parameter Measurement of Synchronous Reluctance Motor using LC Resonance," Journal of Applied Physics, Vol. 99, No. 8, Parts 2 & 3, 08R317, 15 April, 2006.

  33. Kab-Jae Lee, Ki-Chan Kim, Sol Kim, Joon-Seon Ahn, SeongYeop Lim, and Ju Lee, "Optimal Magnet Shape to Improve Torque Characteristics of Interior Permanent Magnet Synchronous Motor," Journal of Applied Physics, Vol. 97, No. 10, Parts 2 & 3, 10Q505, 15 May, 2005.

  34. Ki-Chan Kim, and Ju Lee, "The Dynamic Analysis of a Spoke-Type Permanent Magnet Generator with Large Overhang," IEEE Transactions on Magnetics, vol. 41, no. 10, pp.3805-3807, October, 2005.

  35. Ki-Chan Kim, Hyung-Woo Lee, Yon-Do Chun, and Ju Lee, "Analysis of Electromagnetic Force Distribution on End Winding for Motor Reliance," IEEE Transactions on Magnetics, vol. 41, no. 10, pp.4072-4074, October, 2005.

  36. S. B. Yoon, I. S. Jung, K. C. Kim, D. S. Hyun, “Dynamic analysis of a reciprocating linear actuator for gas compression using finite element method,” IEEE Transactions on Magnetics, vol. 33, no. 5, pp. 4113-4115, 1997.

​

​

  • Domestic Journals

​

  1. 김기찬, “자동차용 솔레노이드 밸브의 동특성을 위한 연성해석” 한국산학기술학회 논문지 , vol. 15, no. 6 pp. 3821-3826, 2014.

  2. 김기찬, “유한 요소법을 이용한 자기부상용 선형유도기의 운전 특성 분석법” 한국산학기술학회 논문지 , vol. 15, no. 7 pp. 4469-4474, 2014.

  3. 김기찬, 신외경 “전기이륜차 기술 동향” 대한전기학회 저널 전기의 세계 , vol. 63, no. 11 pp. 32-40, 2014.

  4. 김기찬, “회전자 돌극 설계를 이용한 다극 매입형 영구자석 동기전동기의 토크리플 저감 연구” 한국산학기술학회 논문지, vol. 15, no. 10, pp. 6270~6275, 2014.

  5. S. O. Shim, and K. C. Kim, “모터의 성능향상을 위한 마그네틱 센서의 3차원 전자장 해석,” Journal of the Korea Academia-Industrialcooperation Society, vol. 14, no. 5, pp. 2381-2387, 2013.

  6. I. S. Jang, S. J. Kim, C. S. Jin, K. C. Kim, and J. Lee, “배리어 길이에 따른 매입형 영구자석 동기전동기의 Ld, Lq 파라미터 특성에 관한 연구,” 대한전기학회 논문지, vol. 58, no. 3,  pp. 496-501, 2009.

  7. K. S. Kim, K. C. Kim, S. G. Lee, S. C. Go, Y. D. Chun, C. K. Lee, and J. Lee, “커패시터 구동형 단상유도전동기의 손실분리 연구,” 대한전기학회 논문지, vol. 57, no. 9,  pp. 1546-1551, 2008. 

  8. K. C. Kim, H. B. Ihm, and J. Lee, “A Study on the Analysis on the Direct-Driven High Power Permanent Magnet Generator for Wind Turbine,” 한국조명전기설비학회 영문논문지, vol. 22, no. 3,  pp. 88-95, 2008.

  9. K. J. Lee, K. C. Kim, J. I. Lee, and J. L. Kwon, “Torque characteristics analysis of interior permanent magnet synchronous motor according to pole arc ratio,” 대한전기학회 논문지, vol. 54, no. 2, pp. 81-87, 2005. 

​

​

  • International Conferences

​

  1. Sang-Hyeon Lee, Dong-Jin Park, and Ki-Chan Kim , “PERFORMANCE ANALYSIS ACCORDING TO FERRITE SHELL OF ROTOR SURFACE OF INTERIOR PERMANENT MAGNET SYNCHRONOUS MOTOR,” International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF 2015), Sept., 2015.

  2. Sang-Hyeon Lee, Yong-Bok Lee, and Ki-Chan Kim , “AN ANALYSIS ON THE CURRENT INFORMATION OF WOUND FIELD SYNCHRONOUS MOTOR FOR HIGH EFFICIENCY,” International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF 2015), Sept., 2015.

  3. Yong-Bok Lee, Ki-Chan Kim , “A STUDY ON THE CORE LOSS OF PWM INVERTER DRIVEN IPMSM CONSIDERING HARMNONICS ON CURRENTS,” International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF 2015), Sept., 2015.

  4. Yong-Bok Lee, Young-Chul Shin, and Ki-Chan Kim , “Electromagnetic Characteristic due to Auxiliary Rotor Slots of Induction Motor,” 24th International Conference on Magnet Technology (MT24), October, 2015.

  5. Yong-Bok Lee, Ki-Chan Kim , “A Study on The Core Loss of PWM Inverter Driven IPMSM considering Harmonics on Currents,” 24th International Conference on Magnet Technology (MT24), October, 2015.

  6. Ki-Chan Kim “Optimal Design of Rotor Slot Shape of Induction Motor for Electric Vehicle,” IEEE International Magnetics Conference Intermag 2015, May. 2015.

  7. Ki-Chan Kim , “Analysis on Correlation between Cogging Torque and Torque Ripple Considering Magnetic Saturation,” 16th Conference on Electriomagnetic Field Computation (CEFC 2014), May, 2014.

  8. Min-Gyu Kim, Liang Fang, and Jung Yoon Lim, and Ki-Chan Kim , “A Novel Calculation Method on the Current Information of Vector Inverter for Interior Permanent Magnet Synchronous Motor for Electric Vehicle,” 16th Conference on Electriomagnetic Field Computation (CEFC 2014), May, 2014.

  9. Min-Gyu KIM, Seung-Ha Jeon, and Ki-Chan KIM , “The Study on Compensation design method for two operating points of BLDC motor according to changes of temperature,” 17th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2013), September, 2013.

  10. Ki-Chan Kim, Min-Gyu Kim, and Dong-Seok Ryu, “A Study on Optimal Design for Error Reduction of MagneticPosition Sensor,” 16th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2012), September, 2012.

  11. Ki-Chan Kim, Su-Jin Hwang, Ki-Young Sung, Yeong-Sik Kim “A Study on the Fault Diagnosis Analysis of Variable Reluctance Resolver for Electric Vehicle” International Conference on Electrical Machines (ICEM 2012) , Sept, 2012

  12. Hong-Hyun Kim, Min-kyu Kim, and Ki-Chan Kim “Optimal Angle Error Reduction of Magnetic Position Sensor by 3D FEM” International Conference on Electrical Machines (ICEM 2012) , Sept, 2012

  13. Min-Gyu Kim, Liang Fang, and Jung Yoon Lim, and Ki-Chan Kim “A Novel Calculation Method on the Current Information of Vector Inverter for Interior Permanent Magnet Synchronous Motor for Electric Vehicle” 15th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2012), Nov, 2012

  14. Ki-Chan Kim “Analysis on Correlation between Cogging Torque and Torque Ripple Considering Magnetic Saturation” 15th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2012), Nov, 2012

  15. Ki-Chan Kim, Dong-seok Ryu, and Min-Gyu Kim “Characteristic of Ferromagnetic Materials Due to Uneven Magnetic Saturation,” IEEE International Magnetics Conference Intermag 2011, pp 3669-3672, Apr. 2011.

  16. Ki-Chan Kim, “Torque Ripple Analysis of Permanent Magnet Assisted Synchronous Reluctance Motor by Using Load Curves,” 15th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2011), September, 2011.

  17. Min-Gyu Kim, Won-Kyu Kim, and Ki-Chan Kim, “A study on optimal Design for Error Reduction of Magnetic Position Sensor,” 15th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2011), September, 2011.

  18. Ki-Chan Kim, Su-Jin Hwang, Ki-Young Sung, and YeongSik Kim, “A Study on the Fault Diagnosis Analysis of Variable Reluctance Resolver for Electric Vehicle,” Sensors 2010 IEEE, pp. 290-295, November, 2010.

  19. S. Kim, J. Im, S. Go. J. Bae, W. Kim, K. Kim, and J. Lee, “Robust Torque Control of DC Link Voltage Fluctuation for SynRM considering Inductances with Magnetic Saturation,” 11th Joint MMM-Intermag Conference 2010, p. 735, January, 2010.

  20. W. Kim, K. Kim, S. Ham, J. Im, S. Im, and J. Lee, “A Study on the Rotor Designing Algorithm using Torque Separation Method and the Characteristics of the Optimal Materials for LSPM,” 11th Joint MMM-Intermag Conference 2010, p. 703, January, 2010.

  21. K. Kim, J.Im, S. Kim, W. Kim, S. Lim, and J. Lee, “A Study on shape of copper die-casting rotor bar of single phase induction motor for high starting torque and high efficiency,” 11th Joint MMM-Intermag Conference 2010, p. 659, January, 2010.

  22. Ki-Chan Kim and Ju Lee, “A Study on Performance Simulation of Interior Permanent Magnet Synchronous Motor for Electric Vehicle considering Nonlinearity,” The 17th Conference on the Computation of Electromagnetic Fields(Compumag 2009), November, 2009.

  23. Ki-Chan Kim and Ju Lee, “Torque Ripple Analysis Method for Permanent Magnet Synchronous Reluctance Motor,” The 17th Conference on the Computation of Electromagnetic Fields(Compumag 2009), November, 2009.

  24. C. Jin, K. Kim, and J. Lee, “Analysis of variable reluctance resolver according to output signal winding methods,” IEEE International Magnetics Conference 2009, p. 148, May, 2009.

  25. J. Bae, S. Kim, J. Im, K. Kim, C. Jin, and J. Lee, “Effects of magnetic saturation on spindle motor characteristics,” IEEE International Magnetics Conference 2009, p. 123, May, 2009.

  26. W. Kim, K. Kim, D. Kang, S. Go, and J. Lee, “Optimal magnet design of PMA-SynRM for wide constant-power operation,” IEEE International Magnetics Conference 2009, p. 73, May, 2009.

  27. Ki-Chan Kim and Ju Lee, “A Study on Design Parameters of a Synchronous Reluctance Motor Considering Magnetic Saturation Effect,” Asian Magnetics Conference (AMC2008), p. 228, December, 2008.

  28. Ki-Chan Kim and Ju Lee, “Magnetic Shield Design between Permanent Magnet Motor and Sensor for a Hybrid Electric Vehicle,” Asian Magnetics Conference (AMC2008), p. 220, December, 2008.

  29. Chang-Sung Jin, Ki-Chan Kim, Dae-Sung Jung, and Ju Lee, “Study on the Improvement Magnetic Torque Characteristics of Interior Permanent Magent Motor for Direct Drive Washing Machine,” Asian Magnetics Conference (AMC2008), p. 96, December, 2008.

  30. Ki-Chan Kim and Ju Lee, “Demagnetization Analysis of Permanent Magnets according to Rotor Types of Interior Permanent Magnet Synchronous Motor,” Asian Magnetics Conference (AMC2008), p. 93, December, 2008.

  31. Chang-Sung Jin, Ki-Chan Kim, Young-Kwan Kim, Sung-Chul Go, and Ju Lee, “Design of IPMSM to Reduce Cogging Torque Considering Tapping the rotor and Shape of Barrier,” the 13th biennial IEEE Conference on Electromagnetic Field Computation, p. 359, May, 2008.

  32. Won-Ho Kim, Ki-Chan Kim, and Ju Lee, “A Study on the Optimal Rotor Design of LSPM Considering Starting Torque and Efficiency,” the 13th biennial IEEE Conference on Electromagnetic Field Computation, p. 344, May, 2008.

  33. Ki-Chan Kim and Ju Lee, “Multi-Objective Optimal Design for Interior Permanent Magnet Synchronous Motor,” the 13th biennial IEEE Conference on Electromagnetic Field Computation, p. 256, May, 2008.

  34. K. Kim and J. Lee, “A Study on the Multi-Objective Optimal Design of Interior Permanent Magnet Synchronous Motor,” Intermag EUROPE 2008, p. 22, May, 2008.

  35. K. Kim and J. Lee, “A Study on the Rotor Design of Interior Permanent Magnet Synchronous Motor for the Wide Constant Power Region,” 52nd Annual Conference on Magnetism and Magnetic Materials, p. 382, November, 2007.

  36. K. Kim and J. Lee, “Optimal Design for Permanent Magnet Wind Trubine Generator coupling with Power Converter,” 52nd Annual Conference on Magnetism and Magnetic Materials, p. 128, November, 2007.

  37. S. Lim, K. Kim, S. Oh, and J. Lee, “Magnetizing Fixture Optimization for Cogging Torque Reduction of Brushless Permanent Magnet Motor,” 52nd Annual Conference on Magnetism and Magnetic Materials, p. 124, November, 2007.

  38. Jae Nam Bae, Ki Chan Kim, Ji Hyung Kim, Gap Jae Lee, Dae Hyun Gu, Seung Ryu, and Ju Lee, “Study about the effect of magnetizing distribution on spindle motor characteristics,” International Conference on Electrical Machines and Systems(ICEMS2007), pp. 832-895, October, 2007.

  39. Kim Ki Chan, Ryu Dae il, Ko Kwang Cheol, Koo Dae Hyun, Baek Soo Hyun, and Lee Ju, “The Parameter Study of Permanent Magnet Wind Generator for the Low Cogging Torque and Power Ripple,” The International Conference on Electrical Engineering (ICEE), p. 210, July, 2007.

  40. Seung-Bin Lim, Ki-Chan KIM, Go Sung Chul, Sang-Hwan Won, and Ju Lee, “Performance Computation of Claw-Pole Type Alternator based 3 Dimension Finite Element Method and Fourier Series,” The 16th Conference on the Computation of Electromagnetic Fields(Compumag 2007), pp. 725-726, June, 2007.

  41. Ki-Chan Kim and Ju Lee, “A Study on the Characteristics according to Duct Shape of IPMSM for Hybrid Electric Vehicle,” The 16th Conference on the Computation of Electromagnetic Fields(Compumag 2007), pp.665-666, June, 2007.

  42. Ki-Chan Kim, Joon Seon Ahn, Sung Hone Won, and Ju Lee, “Design of Synchronous Reluctance Motor with Optimal Barrier Structure in the Rotor,” The 16th Conference on the Computation of Electromagnetic Fields(Compumag 2007), pp. 663-664, June, 2007.

  43. K. Kim and J. Lee, “Analysis of axial magnetic force distribution due to the axial clearance for electrical rotating machine,” 10th Joint MMM/INTERMAG Conference, pp. 490-491, January, 2007.

  44. K. Kim, J. Ahn. S. Won, and J. Lee, “A study on the optimal design of synchronous reluctance motor for the maximum torque and power factor,” 10th Joint MMM/INTERMAG Conference, p. 490, January, 2007.

  45. K. Kim and J. Lee, “A study on the magnetic shield between permanent magnet motor and sensor for hybrid electric vehicle,” 10th Joint MMM/INTERMAG Conference, p. 420, January, 2007.

  46. K. Kim and J. Lee, “The study on the characteristics of pole arc and salient pole ratio to improve torque performance of IPMSM,” 10th Joint MMM/INTERMAG Conference, p. 418, January, 2007.

  47. J. Ahn, S. Won, K. Kim, and J. Lee, “The Position Tracking Characteristic Analysis of 3-DOF Spherical PM Motor,” 10th Joint MMM/INTERMAG Conference, p. 327, January, 2007.

  48. K. Kim and J. Lee, “The study on the lumped parameter design method for permanent magnet motor with the overhang coefficient by using REM and simulation DOE,” 10th Joint MMM/INTERMAG Conference, p. 326, January, 2007.

  49. Lee Sung Gu, Song-Hong Won, Hyoung-Woo Lee, Joon-Seon Ahn, Ki-Chan Kim, Seung-Kil Choi, and Ju Lee, “Combined method reducing calculation time of 3D transient finite element analysis,” The 2006 International Conference on Electrical Machines and Systems(ICEMS2006), DS4E2-04, November, 2006.

  50. Ki-Chan KIM, Yo-Han Hwang, Dae-Hyun Koo, Samuel Yeo, Chul Kyu Lee, and Ju Lee, “A Study on the Motor Performance due to Winding Design for Single Phase Induction Motor,” The 2006 International Conference on Electrical Machines and Systems(ICEMS2006), DS2E1-02, November, 2006.

  51. K. Kim, J. Ahn, S. Won, and J. Lee, “A New Torque Ripple Analysis Method for Permanent Magnet Assisted Synchronous Reluctance Motor by using Load Angle Characteristic,” IEEE International Magnetics Conference, p. 981, May, 2006.

  52. K. Kim, S. Lim, and J. Lee, “The Design of Permanent Magnet Synchronous Motor Considering Partial Demagnetization on the Permanent Magnet,” IEEE International Magnetics Conference, p. 309, May, 2006.

  53. Sung-Hong Won, Joon Seon Ahn, Ki Chan Kim, and Ju Lee, “Performance Prediction of Switched Reluctance Motor Considering Windage Loss for High Speed Application,” the 12th biennial IEEE Conference on Electromagnetic Field Computation, p. 414, April, 2006.

  54. Ki-Chan Kim and Ju Lee, “Overhang Effect Analysis of Permanent Magnet Machine According to the Rotor Types,” the 12th biennial IEEE Conference on Electromagnetic Field Computation, p. 411, April, 2006.

  55. Sol Kim, Seung-Bin Lim, Ki-Chan Kim, Joon Seon Ahn, and Ju Lee, “Analysis of Synchronous Reluctance Motor using Equivalent Magnet Considering Skew and Flux Density Harmonics Contents,” the 12th biennial IEEE Conference on Electromagnetic Field Computation, p. 110, April, 2006.

  56. Ki-Chan Kim and Ju Lee, “Comparison of Biot Savart Simulation and 3D Finite Element Simulation the Electromagnetic Force acting on End Windings of Electrical Machines,” the 12th biennial IEEE Conference on Electromagnetic Field Computation, p. 101, April, 2006.

  57. Ki-Chan Kim, Joon Seon Ahn, Sung Hong Won, and Ju Lee, “A Study on the Calculation and Reduction Method of Torque Ripple for Permanent Magnet Assisted Synchronous Reluctance Motor by using the Load Angle Curves,” the 12th biennial IEEE Conference on Electromagnetic Field Computation, p. 75, April, 2006.

  58. Ki-Chan Kim, Seung-Bin Lim, and Ju Lee, “The Effect on Partial Demagnetization of Permanent Magnet Synchronous Motor for Hybrid Electric Vehicle,” the 12th biennial IEEE Conference on Electromagnetic Field Computation, p. 67, April, 2006.

  59. Kab-Jae Lee, Ki-Chan Kim, and Ju Lee, “Analysis n the Effect of Pole Arc and Salient Pole Ratio to Improve Torque Characteristics of IPMSM,” 12th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2005), pp. 384-385, September, 2005.

  60. Ki-Chan Kim and Ju Lee, “Analysis of Axial Magnetic Force Distribution due to Axial Gap for Electrical Rotational Machine,” 12th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2005), pp. 382-383, September, 2005.

  61. Ki-Chan Kim and Ju Lee, “Analysis on the magnetic Field Saturation Effect due to Ventilation Hole in the Core,” 12th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2005), pp. 380-381, September, 2005.

  62. Ki-Chan Kim, Seung-Bin Lim, Ki-Bong Jang, Sung-Gu Lee, and Ju Lee, “Analysis on the Direct-Driven High Power Permanent Magnet Generator for Wind Turbine,” The eighth International Conference On Electrical Machines and Systems(ICEMS 2005), September, 2005.

  63. Kab-Jae Lee, Ki-Chan Kim, and Ju Lee, “Rotor Design to Optimize Torque Characteristics og Interior Permanent Magnet Motor with Fitting Mechanical Safety,” The 15th Conference on the Computation of Electromagnetic Fields Shenyang (Compumag 2005), I-225, June, 2005.

  64. Ki-Chan KIM, Kab-Jae Lee, and Ju Lee, “Analysis of Electromagnetic Force Distribution on the End Winding of motor by Using 3D FEM,” The 15th Conference on the Computation of Electromagnetic Fields Shenyang (Compumag 2005), I-225, June, 2005.

  65. Ki-Chan KIM, Kab-Jae Lee, and Ju Lee, “Characteristic Analysis of Spoke Type Permanent Magnet Generator Considering Overhang by Using 2D & 3D FEM,” The 15th Conference on the Computation of Electromagnetic Fields Shenyang (Compumag 2005), I-225, June, 2005.

  66. Kab-Jae Lee, Ki-Chan Kim, and Ju Lee, “Rotor optimization of interior permanent magnet synchronous motor considering mechanical stress,” Intermag ASIA 2005, p. 359, April, 2005.

  67. Ki-Chan KIM, Kab-Jae Lee, and Ju Lee, “Dynamic analysis of spoke type permanent magnet generator with large overhang,” Intermag ASIA 2005, p. 334. April, 2005.

  68. Kab-Jae Lee, Ki-Chan Kim, and Ju Lee, “Analysis on the effect of pole arc and salient pole ratio to improve torque characteristics of IPMSM,” Intermag ASIA 2005, p. 334, April, 2005.

  69. Ki-Chan KIM, Kab-Jae Lee, and Ju Lee, “Analysis of electromagnetic force distribution on end winding for motor reliance,” Intermag ASIA 2005, p. 889, April, 2005.

​

​

  • Domestic Conferences

​

  1. 이용복, 박동진, 유석현, 김기찬, “레졸버 회전자 형상의 변압비에 따른 각도 오차율 분석,” 대한전기학회 하계학술대회 논문집, pp. 778-779, July, 2015

  2. 이상현, 신영철, 유석현, 김기찬, “권선계자형 동기전동기의 토크리플 저감을 위한 회전자의 스큐와 비대칭 설계 모델의 비교 분석,” 대한전기학회 하계학술대회 논문집, pp. 812-813, July, 2015

  3. 이용복, 김재호, 전승하, 박성인, 김윤현, 김기찬, “PWM 인버터의 캐리어 주파수를 고려한 SPMSM의 손실 분석,” 대한전기학회 하계학술대회 논문집, pp. 886-887, July, 2014

  4. 박성인, 김홍현, 김재호, 김기찬, 김윤현, “Slotless VR resolver의 설계,” 대한전기학회 하계학술대회 논문집, pp. 751-752, July, 2013

  5. 전승하, 김태현, 이상현, 김기찬, “회전자 형상에 따른 견인용 WRSM의 토크 특성,” 대한전기학회 하계학술대회 논문집, pp. 795-796, July, 2013

  6. 김재호, 김홍현, 박성인, 전승하, 김기찬, “매입형 영구자석 동기전동기의 회전자 체적에 따른 Ld, Lq 및 토크 파라미터 분석,” 대한전기학회 하계학술대회 논문집, pp. 799-800, July, 2013

  7. 김홍현, 박성인, 김재호, 김기찬, “Barrier 비대칭 형상을 이용한 IPMSM 토크 리플 저감 설계,” 대한전기학회 하계학술대회 논문집, pp. 859-860, July, 2013

  8. 김태현, 박성인, 김재호, 김기찬, “3D FEM을 이용한 외란에 강건한 레졸버 해석,” 대한전기학회 하계학술대회 논문집, pp. 911-912, July, 2013

  9. 유종일, 김용태, 한창수, 김기찬, “계자 권선형 동기 모터의 성능 해석을 위한 파라미터 특성 분석,” 한국자동차공학회 부문종합 학술대회 논문집, pp. 1973-1975, 2013

  10. 황점굉, 성기용, 류동석, 김민규, 김홍현, 김기찬, “전기자동차 구동용 동기전동기와 유도전동기의 특성 비교,” 대한전기학회 하계학술대회 논문집, pp. 38-40, October, 2011

  11. 류동석, 성기용, 황수진, 황점굉, 김민규, 김기찬, 김윤현, “레졸버 형상 변화에 따른 각도정보 선형성 분석,” 대한전기학회 하계학술대회 논문집, pp. 876-877, July, 2011

  12. 황수진, 성기용, 김민규, 류동석, 황점굉, 김기찬, “분수슬롯 영구자석 동기전동기의 권선법 연구,” 대한전기학회 하계학술대회 논문집, pp. 878-879, July, 2011

  13. 성기용, 황수진, 김민규, 류동석, 황점굉, 김기찬, “전기자동차용 유도전동기 슬롯 형상에 따른 고속운전 특성 연구,” 대한전기학회 하계학술대회 논문집, pp. 880-881, July, 2011

  14. 김민규, 성기용, 황수진, 류동석, 황점굉, 김원규, 김윤현, 김기찬, “다구찌 기법과 3D FEM해석을 이용한 Magnetic position sensor의 고조파 저감에 대한 연구,” 대한전기학회 하계학술대회 논문집, pp. 904-905, July, 2011

  15. 김재광, 정윤미, 김기찬, 이대동, 김영달, “영구자석 풍력발전기의 특성해석 기법 연구,” 대한전기학회 하계학술대회 논문집, pp. 1324-1325, July, 2011

  16. Dong-Seok Ryu, Ki-Chan Kim, and Youn-Hyun Kim, “A Study on the simulation of resolver-to-digital converter for the Analog waveforms VR Resolver and Simulation,” 대한전기학회 전기기기 및 에너지변환시스템 부문회 추계학술 논문집, pp. 219-221, October, 2010.

  17. Min-Gyu Kim and Ki-Chan Kim, “The Study on the dynamometer experimental set for electrical motor performance by LABVIEW DAQ,” 대한전기학회 전기기기 및 에너지변환시스템부문회 추계학술 논문집, pp. 216-218, October, 2010.

  18. Ki-Young Sung, Min-Gyu Kim, Jun-Seob Min, and Ki-Chan Kim, “A study on the analysis method of cogging torque according to skew angle for Permanent Magnet Synchronous Motor,” 대한전기학회 하계학술대회 논문집, pp. 754-755, July, 2010.

  19. Su-jin Hwang, Dong-Seok Ryu, Ki-Chan Kim, and Youn-Hyun Kim, “A Study on the Analysis of Variable Reluctance Resolver and the Simulation of Nonlinearity of Position Signal,” 대한전기학회 하계학술대회 논문집, pp. 670-671, July, 2010.

  20. Ki-Chan Kim and Ju Lee, “A Study on Analysis Method of Torque and Torque Ripple according to Load Angle for Permanent Magnet Motor,” 대한전기학회 하계학술대회 논문집, pp. 621-622, July, 2009.

  21. 박재영, 배재남, 김기찬, 이주, “비대칭 착자에 따른 스핀들 모터 특성에 관한 연구,” 대한전기학회 하계학술대회 논문집, pp. 38-40, October, 2008

  22. 이상훈, 김기찬, 김광수, 김수용, 김원호, 이주, “단상유도전동기의 동 다이캐스팅과 손실 저감을 위한 고정자 설계,” 대한전기학회 하계학술대회 논문집, pp. 705-706, July, 2008.

  23. 김광수, 김기찬, 이상훈, 이주, “커패시터 구동형 단상 유도전동기의 손실분리 연구,” 대한전기학회 하계학술대회 논문집, pp. 16-18, April, 2008.

  24. 진창성, 배재남, 김기찬, 손락원, 김솔, 이주, “고조파, 와전류 및 열 해석을 통한 BLDCM, IPMSM의 특성비교,” 대한전기학회 하계학술대회 논문집, pp. 25-27, October, 2007.

  25. 김지형, 장익상, 김기찬, 고성철, 안준선, 전연도, 이주, “3상 유도전동기의 고효율을 위한 손실 저감 방법의 연구,” 대한전기학회 하계학술대회 논문집, pp. 1061-1062, July, 2007.

  26. 강동우, 원성홍, 이성구, 김기찬, 김승주, 이주, “3자유도 영구자석형 스피리컬 모터의 토크 시뮬레이션,” 대한전기학회 하계학술대회 논문집, pp. 138-140, April, 2007.

  27. 김승주, 안준선, 김기찬, 고성철, 이주, “DC Link 전압 합성을 이용한 동기형 릴럭턴스 전동기 토크 제어,” 대한전기학회 하계학술대회 논문집,” pp. 19-21, October, 2006.

  28. 배재남, 임승빈, 김기찬, 정대성, 이성구, 이주, “움직임을 고려한 전기기기의 유한요소 기법에 관한 연구,” 대한전기학회 하계학술대회 논문집,” pp. 16-18, October, 2006.

  29. 김광수, 김기찬, 이성구, 이주, “3상 유도 전동기의 기동 특성 향상을 위한 Part winding 해석 및 설계,” 대한전기학회 하계학술대회 논문집,” pp.807-808, July, 2006.

  30. 유대일, 임승빈, 김기찬, 원성홍, 이주, “BLDC 전동기의 코깅토크 저감을 위한 고정자 설계,” 대한전기학회 하계학술대회 논문집, pp. 767-768, July, 2006.

  31. 김원호, 김기찬, 원성홍, 안준성, 최승길, 이주, “동기형 릴럭턴스 전동기의 토크와 역률의 최대화를 위한 설계 및 해석,” 대한전기학회 하계학술대회 논문집, pp. 753-754, July, 2006.

  32. 황요한, 김기찬, 원성홍, 정대성, 이주, “단상유도기의 권선법 및 슬롯 구조에 따른 특성 해석 연구,” 대한전기학회 하계학술대회 논문집, pp. 203-205, April, 2006.

  33. 김기찬, 김솔, 이철직, 이주, “영구자석 회전자 타입에 다른 오버행 효과 고찰,” 대한전기학회 하계학술대회 논문집, pp. 3-5, October, 2005.

  34. 김승주, 안준선, 김기찬, 김솔, 이주, “LC 공진을 이용한 동기형 릴럭턴스 전동기의 파라미터 측정,” 대한전기학회 하계학술대회 논문집, pp. 1282-1284,  July, 2005.

  35. Kab-jae Lee, Ki-Chan Kim, Jong-In Lee, and Joong-Lok Kwon, “Torque Characteristics Analysis of Interior permanent Magnet Synchronous Motor According to Pole Arc Ratio,” 전기학회 논문지, vol. 54, no. 2, pp. 81-87, February, 2005.

  36. 이정일, 김기찬, 권중록, 제준모, “대형 회전기 Axial Magnetic Force 해석,” 대한전기학회 하계학술대회 논문집, B권, pp. 827-829, 2004.

  37. 김기찬, 김근웅, 이승명, “오버행을 고려한 spock type 영구자석 발전기의 특성해석,” 대한전기학회 하계학술대회 논문집, B권, pp. 785-787, 2004.

  38. 김근웅, 김기찬, 이정일, 김진오, “원통형 발전기 자기소음저감을 위한 특성해석에 관한 연구,” 대한전기학회 하계학술대회 논문집, B권, pp. 782-784, 2004.

  39. 김종구, 김기찬, 이찬주, “선박추진용 HTS 모터 기술분석 연구,” 대한전기학회 하계학술대회 논문집, B권, pp. 779-781, 2004.

  40. 이갑재, 김기찬, 이종인, 권중록, “극호비 변화에 따른 영구자석 매입형 동기전동기의 토크 특성 해석,” 대한전기학회 하계학술대회 논문집, B권, pp. 758-760, 2004(우수논문상).

  41. 이정일, 권중록, 김기찬, “직접구동 영구자석 풍력발전기의 기술동향,” 대한전기학회 춘계학술대회 논문집, EMECS, pp. 97-100, 2003.

  42. 박정태, 김근웅, 김기찬, 이갑재, “선박 추진용 전동기 기술개발 동향,” 대한전기학회 하계학술대회 논문집, B권, pp. 632-634, 2001.

  43. 이갑재, 김기찬, 권중록, 이종찬, 이주, “공작기계용 서보동전기의 시리즈 설계 연구,” 대한전기학회 하계학술대회 논문집, pp. 786-788, July, 2001.

​

 

Patent

​

  • Domestic Patent

​

  1. 등록번호 100947011, “영구자석 모터 및 모터 제어방법,” 김기찬, 진창성, 김승주, 이주.

  2. 등록번호 100858290, “공랭식 전동장치,” 김기찬, 이주.

  3. 등록번호 100720303, “스위치드 릴럭턴스 모터의 회전자 및 그 제조방법,” 원성홍, 안준선, 김기찬, 임승빈, 이주.

  4. 등록번호 100476585, “통풍로가 형성된 전동기의 냉각구조,” 이종인, 권중록, 박정태, 이갑재, 이정일, 김기찬, 이준엽.

  5. 등록번호 100476587, “동바 타입 유도전동기의 브레징 방법,” 이종인, 권중록, 박정태, 이갑재, 이정일, 김기찬, 이준엽

​

bottom of page